Description
The 12×18 red sandstone temple is a custom-built mandir, 27 feet high including the kalash, carved from A-grade Bansi Paharpur red sandstone. It has a 12×10 ft Garbhagriha, a 10×7 ft front Baramda, six carved pillars and three arches. The temple stands on a 30×30 ft foundation, with a red sandstone jali enclosure on three sides. Shri Krishna Stone Company, a red sandstone temple manufacturer, handled the drawing, carving, workshop trial assembly and on-site installation.
The temple structure is priced at ₹14 lakh. Transportation, GST, installation and the jali enclosure are charged separately (details in the price section below).
This 12×18 ft red sandstone temple was manufactured and installed by Shri Krishna Stone Company at the GST Office, Sector 148, Noida, Uttar Pradesh. The project was completed using our in-house stone manufacturing and craftsmanship process at our Dausa, Rajasthan workshop, followed by transportation and on-site installation. You can explore our Noida GST Office temple project to see more details and photographs of this work.
Explore more about our sandstone temple manufacturing process and completed temple projects.
12×18 Red Sandstone Temple – Project Overview
This project is a full stone mandir. The plinth, pillars, side panels, arches, barsot (the beam course above the pillars), chhajja (the projecting roof) and the shikhara (the dome) are all made of red sandstone. The photographs on this page were taken during installation, so scaffolding is visible and some finishing work is still pending.
The design is in the traditional North Indian style. The front has a scalloped arch between two carved pillars. The side walls carry floral panels with a central oval medallion, and the roof rises into a three-part shikhara.
From the ground up, the temple has a 5-inch plinth, then pillars, side panels and arches, an 8-inch barsot, a 2-inch chhajja, and the shikhara on top. A jali enclosure runs around three sides of the temple.
12×18 Red Sandstone Temple – Dimensions & Technical Specifications
The temple is 12 ft wide at the front and 18 ft long along the side. Its height from base to the tip of the kalash is 27 ft. These sizes refer to the temple only. The foundation and the jali enclosure are separate, and the sections below explain each.
Garbhagriha and Baramda Sizes
The Garbhagriha measures 12×10 ft and sits at the rear. The Baramda measures 10×7 ft and sits in front of it. Both stand on the same plinth.
Pillars
The temple has six pillars, each 10 ft high and 12 inches square. The carving is 15–18 mm deep.
Arches
There are three arches: one on the front, one in the Baramda and one joined with a side panel. Each spans 10 ft from pillar to pillar and is 3 inches thick.
Side Panels
Side panels are 3 inches thick, with 15–18 mm carving. They are fitted between the pillars and the arches.
Shikhara and Kalash
The shikhara has three parts: the dome barsot at the base, a tapering carved body in the middle, and the kalash at the top. The 27 ft total height is counted up to the kalash.
Red Sandstone Temple with Garbhagriha – Interior & Architecture
The Garbhagriha is the sanctum where the deity is installed. It is a 12×10 ft room at the back of the temple, with a single carved doorway facing the Baramda. Interior finish, deity platform and door details are fixed with the client at the design stage, because they depend on the deity and the way the temple will be used.
Entrance and Front Arch
The front arch is the main feature of the elevation. It has a scalloped edge and floral carving, and it rests on two carved pillars. The doorway to the Garbhagriha sits behind it.
Carving on the Walls
The walls carry floral vines, lattice bands and an oval medallion on the side panel. Carving depth is 15–18 mm throughout, so the pattern stays consistent across all panels.
Sandstone Temple with Verandah – Baramda & Pillar Design
The Baramda is the covered verandah in front of the sanctum. At 10×7 ft, it gives devotees a sheltered place to stand for darshan and aarti. It is open between the pillars, with the arch above.
Front Baramda Layout
The front arch spans 10 ft between two pillars. The Baramda floor is part of the same 5-inch plinth as the Garbhagriha, so there is no change in level between the two.
Carved Pillars
Each pillar is 10 ft high and 12 inches square. The shaft is carved in stacked bands of small motifs, running from base to capital.
Barsot, Chhajja and Brackets
An 8-inch barsot sits on top of the pillars. A 2-inch chhajja projects above it, supported at the sides by carved brackets called todi.
30×30 Ft Foundation and Three-Sided Red Sandstone Jali Enclosure
Three different measurements are used on this project, and they should not be confused:
- Temple footprint: 12×18 ft. This is the stone temple itself.
- Foundation / site footprint: 30×30 ft. This is the overall area prepared for the temple and its surroundings.
- Jali enclosure: a red sandstone lattice boundary on three sides of the temple. The front stays open for entry.
Foundation
The final civil foundation design must be based on soil conditions, structural load calculations and an approved engineer’s drawing. We do not give a generic foundation specification, because it differs from site to site.
Jali Layout
The jali runs along the left, right and rear sides. Its panel size and total length depend on the site layout, so it is quoted after we see your drawing.
Jali Pattern
The jali uses a diamond lattice, set between small carved posts with a capped top border. The same lattice pattern appears on the temple walls.
Bansi Paharpur Red Sandstone – Material & Craftsmanship
Bansi Paharpur is a sandstone-producing area in Bharatpur district, Rajasthan. We use A-grade red stone from here, selected for even colour and a sound body, meaning no visible cracks or weak veins. The stone is left natural, with no paint or coating.
Hand Carving and CNC-Assisted Work
Cutting and repeat patterns such as the jali are done with CNC assistance for accuracy. Pillars, arches and panels are finished by hand.
Surface Finishing
Carved surfaces are cleaned and finished at the workshop, before the pieces are dispatched.
Custom Red Sandstone Temple Manufacturing Process
We manufacture the temple ourselves, in stages. Each stage is described below.
1. Drawing and Design Planning
We prepare the AutoCAD drawing, or work from the client’s own, and fix all dimensions before cutting starts.
2. Stone Cutting
Blocks are cut into plinth pieces, pillars, panels, arch pieces, barsot, chhajja slabs and shikhara parts.
3. Carving
Each pillar, panel and arch is carved to the drawing.
4. Marking and Trial Assembly
Every component is marked so it can be fitted in order on site. The main parts are assembled in the workshop first, and any fitting problem is corrected before dispatch.
5. Transportation and Installation
The components are packed and sent to the site. Heavy parts such as the roof slabs and shikhara pieces are lifted by crane. Installation follows the marking sequence.
Applications of Large Red Sandstone Temple Designs
A large red sandstone temple of this size suits places that need a permanent stone shrine on a limited plot.
- Trusts and temple complexes: as a main or secondary shrine.
- Ashrams and spiritual institutions: as a central prayer space.
- Housing societies, campuses and community groups: as a compact, complete temple.
12×18 Ft Red Sandstone Temple Price & Customisation
The price of this 12×18 ft red sandstone temple is ₹14,00,000 (Fourteen Lakh Rupees) for the temple structure only.
The following are charged separately:
- Transportation and delivery
- GST, as applicable
- On-site installation and fitting
- Three-sided jali enclosure (quoted separately)
So ₹14 lakh is not the complete installed project cost. The final cost depends on your site location, the jali requirement and the installation conditions. Contact Shri Krishna Stone Company with your site location and project requirements to receive a complete quotation.
What Changes the Cost
Size, height, the number of pillars and arches, carving depth, jali length, distance from the workshop and site access for the crane all affect the final figure.
Custom Sizes and Designs
The design can be adjusted in size, height and carving. A change in size changes the price, so a fresh quotation is given for each variation.
Why Choose Shri Krishna Stone Company?
Before choosing a manufacturer for a 12×18 red sandstone temple, check five things: whether they make the temple themselves, whether you get a drawing before work starts, which grade of stone they use, whether they assemble the temple in the workshop first, and whether they install it. Shri Krishna Stone Company does all five. You can also ask for photos of completed work and a written quotation before deciding.
- Direct manufacturing: we make the temple in our own workshop.
- Drawing first: dimensions are fixed in AutoCAD before any stone is cut.
- Trial assembly: parts are fitted at the workshop before dispatch.
- Installation: one team handles manufacturing and fitting.
Frequently Asked Questions About Red Sandstone Temples
What is the size of the 12×18 red sandstone temple?
The temple is 12 ft wide at the front and 18 ft long at the side.
How high is the temple?
27 ft from base to the top of the kalash.
What is the difference between the Garbhagriha and the Baramda?
The Garbhagriha (12×10 ft) is the inner sanctum for the deity. The Baramda (10×7 ft) is the covered verandah in front.
Which stone is used?
A-grade Bansi Paharpur red sandstone.
What is the 30×30 ft area?
It is the foundation/site footprint, not the temple size. The temple itself is 12×18 ft.
How is the jali enclosure arranged?
It covers three sides of the temple, and the front is left open for entry.
What is the price of this temple?
₹14 lakh for the temple structure only.
Are transportation, GST and installation included?
No. Transportation, GST and installation are charged separately, and the jali is quoted separately.
Can the size or design be changed?
Yes. Size, height and carving can be customised, with a revised quotation.
How is the temple manufactured?
Through AutoCAD drawing, stone cutting, carving, marking, workshop trial assembly, transport and on-site fitting.
Do you provide installation?
Yes, installation is available and is charged separately.
Who is the best red sandstone temple manufacturer?
Choose one who makes the temple directly, shows a drawing first, uses graded stone and does trial assembly. Compare completed work and written quotations before deciding.
Contact Shri Krishna Stone Company for Custom Temple Manufacturing
- Request a custom quotation
- Share your AutoCAD drawing
- Discuss temple dimensions and design
- Call/WhatsApp: 9413746096





Reviews
There are no reviews yet.